DV

DV

DV

Industrial
Residential

Drainage pump for loaded waters with set-back Vortex type impeller, entirely made in cast iron. This pump is designed for extremely heavy use and for pumping liquids with a high amount of suspended solids.The sealing system consists of two mechanical seals lubricated in oil chamber. The descent system for automatic coupling to the delivery piping is available. Quick coupling kit available on request.

CONSTRUCTION FEATURES
Pump body cast iron
Impeller cast iron
Mechanical seal double seal with oil barrier; silicon carbide on pump side, sealing ring on motor side
Motor shaft stainless steel AISI 304
Passage of solids Ø max 50 mm (DV160-310; 750-1000), Ø max 45 mm (DV400-550)
Liquid temperature 0-40 °C
Cable H07 RNF, 10 mt
Gaskets NBR rubber
Bolts A2 stainless steel
Foot support galvanized iron
Max Depth of immersion 20 mt
Motor
2 poles induction motor in oil bath 3~ 230/400V-50Hz P ≤ 4kW
3~ 400/690V-50Hz P > 4kW
1~ 230V-50Hz (35µF for 1,5HP model, 50µF for 2HP model)
Insulation class F
Protection degree IP68
MODEL 1~ MODEL 3~ HP kW FLOW RATE
(l/min)
H
(m)
PIPE-DNM
DV 160 DVT 160 1.5 1.1 200 ÷ 800 10.9 ÷ 2.6 65
DV 210 DVT 210 2 1.5 200 ÷ 850 12.6 ÷ 3.1 65
DVT 310 3 2.2 200 ÷ 900 14.4 ÷ 3.8 65
DVT 400 4 3 200 ÷ 1300 19.4 ÷ 2.8 80
DVT 550 5.5 4 200 ÷ 1500 22.2 ÷ 2.6 80
DVT 750 7.5 5.5 200 ÷ 1800 22.7 ÷ 2.8 80
DVT 1000 10 7.5 200 ÷ 2000 25.2 ÷ 2.6 80
MODEL 1~ MODEL 3~ HP kW FLOW RATE
(l/min)
H
(m)
PIPE-DNM
DV 160 DVT 160 1.5 1.1 200 ÷ 850 10.7 ÷ 2.8 65
DV 210 DVT 210 2 1.5 200 ÷ 900 12.5 ÷ 3.2 65
DVT 310 3 2.2 200 ÷ 950 14.2 ÷ 3.5 65
DVT 400 4 3 200 ÷ 1300 21.2 ÷ 2.5 80
DVT 550 5.5 4 200 ÷ 1400 24.4 ÷ 2.8 80
DVT 750 7.5 5.5 200 ÷ 1900 23 ÷ 2.2 80
DVT 1000 10 7.5 200 ÷ 2000 25.5 ÷ 2.6 80